2-in-1 Wireless Dog Fence & Training Collar, 15–120 lb Dogs

One transmitter, two modes: a wireless yard boundary and a remote training collar — no wire burial needed.

Two Modes, One System

Wireless Fence Mode: 16 Levels, 20–850 ft Range

Set a radial wireless boundary anywhere from 20 ft to 850 ft using 16 distance levels. When your dog crosses the boundary, the receiver collar activates a beep, vibration, and static correction in sequence — and stops automatically when your dog returns. One transmitter pairs with unlimited receiver collars, and all receivers connect automatically on power-on. No wires to bury, no permanent installation.

Remote Training Mode: Up to 3 Dogs, 0–9 Intensity

Switch to training mode to send direct commands to your dog via the sound, vibration, or static correction button. Supports up to 3 dogs simultaneously on separate channels. Vibration and static correction each have 10 intensity levels (0–9), letting you start low and adjust. Two silicone caps come pre-assembled on the receiver probes to help reduce unnecessary contact intensity during initial training.

IPX6 Waterproof + Reflective Collar, Fits 15–120 lb Dogs

The receiver collar is IPX6 waterproof — safe for wet grass, sprinkler contact, and light rain. The woven strap adjusts from 9.45" to 22.83" (24–58cm), fitting most dogs 6 months and older weighing 15–120 lbs. Reflective strips on the collar improve visibility in low-light and nighttime conditions.

Details

Both the transmitter and receiver use built-in rechargeable batteries charged via the included USB cable in 1–2 hours. The transmitter runs 1–2 days on a full charge; the receiver has a standby time of 7–10 days depending on usage frequency. The compact system is portable enough to use at home, in the yard, at campgrounds, or in vacation rental properties without any permanent setup.

Specifications

Frequently Asked Questions

Can I use this to contain my dog in the backyard without burying wires?

Yes — the wireless fence mode creates a radial boundary with no wires or permanent installation. Set the distance level (20 ft to 850 ft) using the transmitter, and the receiver collar activates when your dog exits the boundary.

Can I use both fence and training modes at the same time?

The system supports both modes, but they operate separately. You switch between Wireless Dog Fence Mode and Remote Dog Training Mode using the transmitter controls.

How many dogs can I use this with?

In fence mode, one transmitter can connect to an unlimited number of receiver collars (each sold separately). In training mode, the system supports up to 3 dogs on separate channels simultaneously.

Is it safe for my dog?

The system includes 0–9 intensity levels for both vibration and static correction, allowing you to start at the lowest effective level. Two silicone caps come pre-assembled on the receiver probes to help reduce contact intensity. The collar should fit with enough room to slide one finger under the strap for proper fit.

Is the receiver waterproof?

The receiver collar is rated IPX6, which means it is protected against strong water jets and suitable for outdoor use in wet grass, sprinkler zones, or light rain. The transmitter's waterproof rating is not specified — keep it dry during use.

How long does the battery last?

The transmitter runs for 1–2 days on a full charge (1–2 hours to charge). The receiver has a standby time of 7–10 days depending on how frequently it activates. Both charge via the included USB cable.

Shipping & Returns

• Free standard shipping to the contiguous US
• 30-day return window for items in original condition